PartsTable
Technical Data Sheet
Download PDF

HP1018115 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HP1018115: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.651 INCHES NOMINAL IN, diameter: 0.1560 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN, style_designator: LEFT INTERNAL THREAD, cross-sectional_shape: ROUND, left_end_chamfer_angle: 45.0 DEGREES NOMINAL, left_end_chamfer_depth: 0.040 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-114-9975, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HP1018115
NSN: 5340-01-114-9975
FSC: 5340 — Hardware, Commercial
CAGE: 70236 — TACTAIR FLUID CONTROLS INC (USA)
SPECIFICATIONS
length0.651 INCHES NOMINAL IN
diameter0.1560 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN
style_designatorLEFT INTERNAL THREAD
cross-sectional_shapeROUND
left_end_chamfer_angle45.0 DEGREES NOMINAL
left_end_chamfer_depth0.040 INCHES NOMINAL IN
right_end_chamfer_angle45.0 DEGREES NOMINAL
right_end_chamfer_depth0.020 INCHES NOMINAL IN
NSN5340-01-114-9975
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HP1018115 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LEFT END CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
LENGTH: 0.651 INCHES NOMINAL IN
•
RIGHT END CHAMFER DEPTH: 0.020 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEFT INTERNAL THREAD
•
DIAMETER: 0.1560 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN
•
RIGHT END CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
CROSS-SECTIONAL SHAPE: ROUND
•
LEFT END CHAMFER DEPTH: 0.040 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LEFT END CHAMFER ANGLE45.0 DEGREES NOMINAL
LENGTH0.651 INCHES NOMINAL IN
RIGHT END CHAMFER DEPTH0.020 INCHES NOMINAL IN
STYLE DESIGNATORLEFT INTERNAL THREAD
DIAMETER0.1560 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM IN
RIGHT END CHAMFER ANGLE45.0 DEGREES NOMINAL
CROSS-SECTIONAL SHAPEROUND
LEFT END CHAMFER DEPTH0.040 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
HP1018115-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy HP1018115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HP1018115?
HP1018115 is a STANDOFF,THREADED,SPACING.
What parts can replace HP1018115?
There is 1 known substitute for HP1018115: HP1018115-1. Substitute compatibility should be verified for your specific system.
What is the NSN for HP1018115?
HP1018115 is cataloged in the U.S. Government catalog under NSN 5340-01-114-9975. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HP1018115

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.