PartsTable
Technical Data Sheet
Download PDF

HNQ-0-9-001PC15 — NUT,SELF-LOCKING,CAP

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

HNQ-0-9-001PC15: NUT,SELF-LOCKING,CAP.

The NUT,SELF-LOCKING,CAP is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: CAP, nut_height: 1.140 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF, locking_feature: PREVAILING TORQUE WITH METALLIC INSERT. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-038-9578, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HNQ-0-9-001PC15
NSN: 5310-01-038-9578
FSC: 5310 — Nuts and Washers
CAGE: 10941 — CARVER PUMP COMPANY (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleCAP
nut_height1.140 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
locking_featurePREVAILING TORQUE WITH METALLIC INSERT
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats1.140 INCHES NOMINAL IN
nominal_thread_size0.750 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch16
NSN5310-01-038-9578
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: HNQ-0-9-001PC15 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.140 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE WITH METALLIC INSERT
•
NUT HEIGHT: 1.140 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
NUT STYLE: CAP
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.140 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
LOCKING FEATUREPREVAILING TORQUE WITH METALLIC INSERT
NUT HEIGHT1.140 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLECAP
THREAD CLASS2B
THREAD QUANTITY PER INCH16
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
D-HNQ-0-9-001PC15Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy HNQ-0-9-001PC15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HNQ-0-9-001PC15?
HNQ-0-9-001PC15 is a NUT,SELF-LOCKING,CAP.
What parts can replace HNQ-0-9-001PC15?
There is 1 known substitute for HNQ-0-9-001PC15: D-HNQ-0-9-001PC15. Substitute compatibility should be verified for your specific system.
What is the NSN for HNQ-0-9-001PC15?
HNQ-0-9-001PC15 is cataloged in the U.S. Government catalog under NSN 5310-01-038-9578. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HNQ-0-9-001PC15