PartsTable
Technical Data Sheet
Download PDF

HN100-11 — NUT,PLAIN,SLOTTED,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

HN100-11: NUT,PLAIN,SLOTTED,HEXAGON.

The NUT,PLAIN,SLOTTED,HEXAGON is a the manufacturer industrial component. Key specifications include nut_height: 0.067 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND, nominal_thread_size: 0.190 INCHES IN, bearing_surface_type: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-156-7709, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HN100-11
NSN: 5310-01-156-7709
FSC: 5310 — Nuts and Washers
CAGE: 09922 — SOURIAU USA, INC. DBA SOURIAU USA INC (USA)
SPECIFICATIONS
nut_height0.067 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
nominal_thread_size0.190 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch32
NSN5310-01-156-7709
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: HN100-11 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT HEIGHT: 0.067 INCHES NOMINAL IN
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 32
•
BEARING SURFACE TYPE: CHAMFERED
TECHNICAL CHARACTERISTICS
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT HEIGHT0.067 INCHES NOMINAL IN
THREAD CLASS2B
THREAD QUANTITY PER INCH32
BEARING SURFACE TYPECHAMFERED
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
2950-0078Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HN100-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HN100-11?
HN100-11 is a NUT,PLAIN,SLOTTED,HEXAGON.
What parts can replace HN100-11?
There is 1 known substitute for HN100-11: 2950-0078. Substitute compatibility should be verified for your specific system.
What is the NSN for HN100-11?
HN100-11 is cataloged in the U.S. Government catalog under NSN 5310-01-156-7709. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HN100-11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.