PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HN-10-32-B
HN-10-32-B ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: HEXAGON, nut_height: 0.125 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-934-9764, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HN-10-32-B
NSN: 5310-00-934-9764
FSC: 5310
CAGE: 08289 — THE DELBERT BLINN CO INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleHEXAGON
nut_height0.125 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
surface_treatmentOXIDE OVERALL
width_across_flats0.375 INCHES NOMINAL IN
nominal_thread_size0.190 INCHES IN
bearing_surface_typeFLAT
thread_quantity_per_inch32
nondefinitive_spec/std_data2 TYPE AND 13 STYLE
NSN5310-00-934-9764
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: HN-10-32-B · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT HEIGHT: 0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 24
•
BEARING SURFACE TYPE: CHAMFERED
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS (FLIS)
NUT HEIGHT0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH24
BEARING SURFACE TYPECHAMFERED
NOMINAL THREAD SIZE0.190 INCHES IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2B
NUT STYLEHEXAGON
SURFACE TREATMENTOXIDE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
R14092Interchangeable
interchangeable cross-reference
interchangeable
495Interchangeable
interchangeable cross-reference
interchangeable
TMS43Interchangeable
interchangeable cross-reference
interchangeable
424QInterchangeable
interchangeable cross-reference
interchangeable
1492FBInterchangeable
interchangeable cross-reference
interchangeable
1492Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HN-10-32-B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HN-10-32-B?
HN-10-32-B is a NUT,PLAIN,HEXAGON.
What parts can replace HN-10-32-B?
There are 33 known substitutes for HN-10-32-B: R14092, 495, TMS43 and 30 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HN-10-32-B?
HN-10-32-B is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-934-9764. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HN-10-32-B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026