PartsTable
Technical Data Sheet
Download PDF

HMJ-2BN — BEARING,BALL,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

HMJ-2BN: BEARING,BALL,ROD END.

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_style: SOLID, thread_class: 3A A, bore_diameter: 0.1870 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, overall_length: 1.0670 INCHES MINIMUM AND 1.0870 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-088-4446, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HMJ-2BN
NSN: 3110-01-088-4446
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 73134 — ROLLER BEARING COMPANY OF AMERICA, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_styleSOLID
thread_class3A A
bore_diameter0.1870 INCHES NOMINAL IN
alignment_typeSELF-ALIGNING
overall_length1.0670 INCHES MINIMUM AND 1.0870 INCHES MAXIMUM IN
inner_ring_width0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
outer_ring_width0.1820 INCHES MINIMUM AND 0.1920 INCHES MAXIMUM IN
style_designatorDOUBLE ROW, STAGGERED, BALL
thread_directionLEFT-HAND
nominal_thread_size0.190 INCHES IN
lubrication_materialGREASE
NSN3110-01-088-4446
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: HMJ-2BN · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.1820 INCHES MINIMUM AND 0.1920 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: DOUBLE ROW, STAGGERED, BALL
•
OVERALL OUTSIDE DIAMETER: 0.4590 INCHES MINIMUM AND 0.4790 INCHES MAXIMUM IN
•
THREAD DIRECTION: LEFT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
SHANK STYLE: SOLID
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.1820 INCHES MINIMUM AND 0.1920 INCHES MAXIMUM IN
STYLE DESIGNATORDOUBLE ROW, STAGGERED, BALL
OVERALL LENGTH1.0670 INCHES MINIMUM AND 1.0870 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.4590 INCHES MINIMUM AND 0.4790 INCHES MAXIMUM IN
THREAD DIRECTIONLEFT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
SHANK STYLESOLID
ALIGNMENT TYPESELF-ALIGNING
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 1
561-042Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HMJ-2BN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HMJ-2BN?
HMJ-2BN is a BEARING,BALL,ROD END.
What parts can replace HMJ-2BN?
There is 1 known substitute for HMJ-2BN: 561-042. Substitute compatibility should be verified for your specific system.
What is the NSN for HMJ-2BN?
HMJ-2BN is cataloged in the U.S. Government catalog under NSN 3110-01-088-4446. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HMJ-2BN