PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HM813846
HM813846 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include length: 10.000 INCHES NOMINAL IN, material: STEEL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, point_type: CONVENTIONAL, load_rating: 11.500 POUNDS MINIMUM AND 12.500 POUNDS MAXIMUM LBS, point_angle: 118.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-793-2947, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HM813846
NSN: 3110-00-793-2947
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
length10.000 INCHES NOMINAL IN
materialSTEEL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
point_typeCONVENTIONAL
load_rating11.500 POUNDS MINIMUM AND 12.500 POUNDS MAXIMUM LBS
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
temp_rating-60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
constructionONE-PIECE
flute_length3.500 INCHES NOMINAL IN
coil_quantity13-1/2
overall_length6.750 INCHES NOMINAL IN
NSN3110-00-793-2947
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: HM813846 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
GGG-D-751 TYEInterchangeable
interchangeable cross-reference
interchangeable
940 3/8Interchangeable
interchangeable cross-reference
interchangeable
1302Interchangeable
interchangeable cross-reference
interchangeable
110-3/8Interchangeable
interchangeable cross-reference
interchangeable
CV18559Interchangeable
interchangeable cross-reference
interchangeable
2010913PC3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HM813846?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HM813846?
HM813846 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace HM813846?
There are 24 known substitutes for HM813846: GGG-D-751 TYE, 940 3/8, 1302 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HM813846?
HM813846 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-793-2947. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HM813846

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026