PartsTable
Technical Data Sheet

HM261049/HM261010 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

HM261049/HM261010: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 3.1250 INCHES NOMINAL IN, cone_width: 4.0000 INCHES NOMINAL IN, bore_diameter: 14.4980 INCHES NOMINAL IN, overall_width: 4.0000 INCHES NOMINAL IN, alignment_type: RIGID. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-448-9486, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HM261049/HM261010
NSN: 3110-01-448-9486
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width3.1250 INCHES NOMINAL IN
cone_width4.0000 INCHES NOMINAL IN
bore_diameter14.4980 INCHES NOMINAL IN
overall_width4.0000 INCHES NOMINAL IN
alignment_typeRIGID
standout_width0.8750 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.3300 INCHES NOMINAL IN
backface_corner_radius0.2500 INCHES NOMINAL IN
overall_outside_diameter20.6250 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
NSN3110-01-448-9486
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: HM261049/HM261010 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
CUP WIDTH: 3.1250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
OVERALL OUTSIDE DIAMETER: 20.6250 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.2500 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.3300 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.8750 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
CUP WIDTH3.1250 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH4.0000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER20.6250 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.2500 INCHES NOMINAL IN
CONE CORNER RADIUS0.3300 INCHES NOMINAL IN
STANDOUT WIDTH0.8750 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
CONE WIDTH4.0000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
2E3-00295 IT NO 52Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HM261049/HM261010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HM261049/HM261010?
HM261049/HM261010 is a BEARING,ROLLER,TAPERED.
What parts can replace HM261049/HM261010?
There is 1 known substitute for HM261049/HM261010: 2E3-00295 IT NO 52. Substitute compatibility should be verified for your specific system.
What is the NSN for HM261049/HM261010?
HM261049/HM261010 is cataloged in the U.S. Government catalog under NSN 3110-01-448-9486. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HM261049/HM261010

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.