PartsTable
Technical Data Sheet
Download PDF

HM212049-2-395 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

HM212049-2-395: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.5100 INCHES NOMINAL IN, bore_diameter: 2.6250 INCHES NOMINAL IN, special_features: SPECIAL INSPECTION, style_designator: NORMAL ANGLE, cone_corner_radius: 0.1400 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-130-6599, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HM212049-2-395
NSN: 3110-01-130-6599
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.5100 INCHES NOMINAL IN
bore_diameter2.6250 INCHES NOMINAL IN
special_featuresSPECIAL INSPECTION
style_designatorNORMAL ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
NSN3110-01-130-6599
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: HM212049-2-395 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
CONE WIDTH: 1.5100 INCHES NOMINAL IN
•
BORE DIAMETER: 2.6250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
CONE WIDTH1.5100 INCHES NOMINAL IN
SPECIAL FEATURESSPECIAL INSPECTION
BORE DIAMETER2.6250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
HM212049-4-395Reference document
Same NSN cross-reference
Reference document — Secondary reference
1228-N-404Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MA268A-21035Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HM212049-2-395?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HM212049-2-395?
HM212049-2-395 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace HM212049-2-395?
There are 3 known substitutes for HM212049-2-395: HM212049-4-395, 1228-N-404, MA268A-21035. Substitute compatibility should be verified for your specific system.
What is the NSN for HM212049-2-395?
HM212049-2-395 is cataloged in the U.S. Government catalog under NSN 3110-01-130-6599. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HM212049-2-395

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.