PartsTable
Technical Data Sheet
Download PDF

HM-12G-2 — BEARING,PLAIN,ROD END

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

HM-12G-2: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY RACE LINER, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.7500 INCHES NOMINAL IN, overall_length: 3.7500 INCHES NOMINAL IN, thread_diameter: 0.7500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-395-2145, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HM-12G-2
NSN: 3120-01-395-2145
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 73134 — ROLLER BEARING COMPANY OF AMERICA, INC. (USA)
SPECIFICATIONS
materialCOPPER ALLOY RACE LINER
shank_styleEXTERNALLY THREADED
thread_class3A A
bore_diameter0.7500 INCHES NOMINAL IN
overall_length3.7500 INCHES NOMINAL IN
thread_diameter0.7500 INCHES NOMINAL IN
style_designatorBALL TYPE
thread_directionRIGHT-HAND
inner_member_width0.8750 INCHES NOMINAL IN
outer_member_width0.6870 INCHES NOMINAL IN
shank_thread_length1.7500 INCHES NOMINAL IN
thread_quantity_per_inch16
NSN3120-01-395-2145
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: HM-12G-2 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK THREAD LENGTH: 1.7500 INCHES NOMINAL IN
•
BORE CENTER TO SHANK END DISTANCE: 2.8750 INCHES NOMINAL IN
•
INNER MEMBER WIDTH: 0.8750 INCHES NOMINAL IN
•
OUTER MEMBER WIDTH: 0.6870 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BALL TYPE
•
THREAD DIAMETER: 0.7500 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SHANK THREAD LENGTH1.7500 INCHES NOMINAL IN
BORE CENTER TO SHANK END DISTANCE2.8750 INCHES NOMINAL IN
INNER MEMBER WIDTH0.8750 INCHES NOMINAL IN
OUTER MEMBER WIDTH0.6870 INCHES NOMINAL IN
STYLE DESIGNATORBALL TYPE
THREAD DIAMETER0.7500 INCHES NOMINAL IN
OVERALL LENGTH3.7500 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
SHANK STYLEEXTERNALLY THREADED
THREAD CLASS3A A
OTHER ITEMS IN FSC 3120 — Bearings, Plain, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3120-00-001-1288 3120-00-001-1835 3120-00-001-1838 3120-00-001-1928 3120-00-001-1934 3120-00-001-3933 3120-00-001-3937 3120-00-001-3938
SUBSTITUTES & CROSS-REFERENCES 1
F100B075Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy HM-12G-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HM-12G-2?
HM-12G-2 is a BEARING,PLAIN,ROD END.
What parts can replace HM-12G-2?
There is 1 known substitute for HM-12G-2: F100B075. Substitute compatibility should be verified for your specific system.
What is the NSN for HM-12G-2?
HM-12G-2 is cataloged in the U.S. Government catalog under NSN 3120-01-395-2145. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HM-12G-2