HLT969DL-12-12 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HLT969DL-12-12: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R56400 OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.374 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-591-0978, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HLT969DL-12-12

NSN: 5320-01-591-0978
FSC: 5320 — Rivets
CAGE: 06725 — SPS TECHNOLOGIES, LLC DBA AIR INDUSTRIES COMPANY DIV AIR INDUSTRIES COMPANY (USA)

SPECIFICATIONS

material	TITANIUM ALLOY UNS R56400 OVERALL
head_style	FLUSH COUNTERSUNK
grip_length	0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.374 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
fastener_length	1.285 INCHES MINIMUM AND 1.305 INCHES MAXIMUM IN
countersink_angle	100.0 DEGREES NOMINAL
head_major_diameter	0.524 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
nominal_thread_size	0.375 INCHES IN
width_between_flats	0.158 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
thread_quantity_per_inch	24
NSN	5320-01-591-0978

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.374 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.285 INCHES MINIMUM AND 1.305 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH COUNTERSUNK

•

NOMINAL THREAD SIZE: 0.375 INCHES IN

•

GRIP LENGTH: 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN

•

WIDTH BETWEEN FLATS: 0.158 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN

•

SHANK STYLE: PIN-RIVET, STRAIGHT, THREADED

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.374 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
FASTENER LENGTH	1.285 INCHES MINIMUM AND 1.305 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH COUNTERSUNK
NOMINAL THREAD SIZE	0.375 INCHES IN
GRIP LENGTH	0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.158 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED
COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCY	PNI-RIVET, THREADED, SHEAR, 100 DEG C'SUNK HEAD, HEX POINT DRIVE DEGC

SUBSTITUTES & CROSS-REFERENCES 2

ST3M758T6-12Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

HLT969TB-12-12Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy HLT969DL-12-12?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HLT969DL-12-12?

HLT969DL-12-12 is a PIN-RIVET.

What parts can replace HLT969DL-12-12?

There are 2 known substitutes for HLT969DL-12-12: ST3M758T6-12, HLT969TB-12-12. Substitute compatibility should be verified for your specific system.

What is the NSN for HLT969DL-12-12?

HLT969DL-12-12 is cataloged in the U.S. Government catalog under NSN 5320-01-591-0978. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HLT969DL-12-12 — PIN-RIVET

Request a Quote — HLT969DL-12-12