HLT969DL-10-5 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HLT969DL-10-5: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: A3A, shank_diameter: 0.302 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-502-5940, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HLT969DL-10-5

NSN: 5320-01-502-5940
FSC: 5320 — Rivets
CAGE: 17446 — HUCK INTERNATIONAL, INC (USA)

SPECIFICATIONS

material	TITANIUM ALLOY OVERALL
head_style	FLUSH COUNTERSUNK
grip_length	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	A3A
shank_diameter	0.302 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
fastener_length	0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
head_major_diameter	0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN
nominal_thread_size	0.312 INCHES IN
width_between_flats	0.127 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN
NSN	5320-01-502-5940

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.302 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.312 INCHES IN

•

GRIP LENGTH: 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN

•

WIDTH BETWEEN FLATS: 0.127 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.302 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
FASTENER LENGTH	0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.312 INCHES IN
GRIP LENGTH	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.127 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED
MINIMUM YIELD STRENGTH	120000 POUNDS PER SQUARE INCH LBS

SUBSTITUTES & CROSS-REFERENCES 5

HLT969TB-10-5Reference document

Same NSN cross-reference

Reference document — Secondary reference

ST3M758T5-5Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

ST3M758Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

HTL969TB-10-5Reference document

Same NSN cross-reference

Reference document — Secondary reference

AIC-L-768-10-5Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HLT969DL-10-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HLT969DL-10-5?

HLT969DL-10-5 is a PIN-RIVET.

What parts can replace HLT969DL-10-5?

There are 5 known substitutes for HLT969DL-10-5: HLT969TB-10-5, ST3M758T5-5, ST3M758 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for HLT969DL-10-5?

HLT969DL-10-5 is cataloged in the U.S. Government catalog under NSN 5320-01-502-5940. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HLT969DL-10-5 — PIN-RIVET

Request a Quote — HLT969DL-10-5