HLT707JS-6-12 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HLT707JS-6-12: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 0.7500 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.2095 INCHES MINIMUM AND 0.2100 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-365-1802, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HLT707JS-6-12

NSN: 5320-01-365-1802
FSC: 5320 — Rivets
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)

SPECIFICATIONS

material	STEEL COMP XM-13 OVERALL
head_style	FLUSH COUNTERSUNK
grip_length	0.7500 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.2095 INCHES MINIMUM AND 0.2100 INCHES MAXIMUM IN
fastener_length	1.1850 INCHES MINIMUM AND 1.2050 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
head_major_diameter	0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM IN
nominal_thread_size	0.1900 INCHES IN
width_between_flats	0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN
NSN	5320-01-365-1802

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.2095 INCHES MINIMUM AND 0.2100 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.1850 INCHES MINIMUM AND 1.2050 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.1900 INCHES IN

•

GRIP LENGTH: 0.7500 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM IN

•

WIDTH BETWEEN FLATS: 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.2095 INCHES MINIMUM AND 0.2100 INCHES MAXIMUM IN
FASTENER LENGTH	1.1850 INCHES MINIMUM AND 1.2050 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.1900 INCHES IN
GRIP LENGTH	0.7500 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED
COUNTERSINK ANGLE	100.0 DEGREES NOMINAL

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 2

HLT707JJ-6-12Reference document

Same NSN cross-reference

Reference document — Secondary reference

GB510EE3-12Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HLT707JS-6-12?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HLT707JS-6-12?

HLT707JS-6-12 is a PIN-RIVET.

What parts can replace HLT707JS-6-12?

There are 2 known substitutes for HLT707JS-6-12: HLT707JJ-6-12, GB510EE3-12. Substitute compatibility should be verified for your specific system.

What is the NSN for HLT707JS-6-12?

HLT707JS-6-12 is cataloged in the U.S. Government catalog under NSN 5320-01-365-1802. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HLT707JS-6-12 — PIN-RIVET

Request a Quote — HLT707JS-6-12