HLT59-8-5 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HLT59-8-5: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-334-7407, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HLT59-8-5

NSN: 5320-01-334-7407
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	IRON ALLOY 660 OVERALL
head_style	FLUSH COUNTERSUNK
grip_length	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
shear_strength	95000 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.697 INCHES MINIMUM AND 0.717 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
surface_treatment	PASSIVATE OVERALL
head_major_diameter	0.4682 INCHES MINIMUM AND 0.4732 INCHES MAXIMUM IN
NSN	5320-01-334-7407

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.697 INCHES MINIMUM AND 0.717 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: HI-SHEAR,SPEC. 258,CAGEC 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.250 INCHES IN

•

GRIP LENGTH: 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
FASTENER LENGTH	0.697 INCHES MINIMUM AND 0.717 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	HI-SHEAR,SPEC. 258,CAGEC 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.250 INCHES IN
GRIP LENGTH	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 1

3D0008-8-5Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy HLT59-8-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HLT59-8-5?

HLT59-8-5 is a PIN-RIVET.

What parts can replace HLT59-8-5?

There is 1 known substitute for HLT59-8-5: 3D0008-8-5. Substitute compatibility should be verified for your specific system.

What is the NSN for HLT59-8-5?

HLT59-8-5 is cataloged in the U.S. Government catalog under NSN 5320-01-334-7407. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HLT59-8-5 — PIN-RIVET

Request a Quote — HLT59-8-5