HLT56A16-13 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HLT56A16-13: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL, head_style: FLAT COUNTERSUNK UNDERCUT, grip_length: 0.822 INCHES MAXIMUM IN, head_height: 0.157 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-508-8792, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HLT56A16-13

NSN: 5320-00-508-8792
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL
head_style	FLAT COUNTERSUNK UNDERCUT
grip_length	0.822 INCHES MAXIMUM IN
head_height	0.157 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM IN
shear_strength	95000 SINGLE POUNDS PER SQUARE INCH
fastener_length	1.487 INCHES MINIMUM AND 1.507 INCHES MAXIMUM IN
special_features	FURNISHED W/RUBBER,SYNTHETIC O-RING
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
NSN	5320-00-508-8792

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.157 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.487 INCHES MINIMUM AND 1.507 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLAT COUNTERSUNK UNDERCUT

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.500 INCHES IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM IN
HEAD HEIGHT	0.157 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
FASTENER LENGTH	1.487 INCHES MINIMUM AND 1.507 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
HEAD STYLE	FLAT COUNTERSUNK UNDERCUT
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.500 INCHES IN
GRIP LENGTH	0.822 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.221 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required

Ready to buy HLT56A16-13?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HLT56A16-13?

HLT56A16-13 is a PIN-RIVET.

What is the NSN for HLT56A16-13?

HLT56A16-13 is cataloged in the U.S. Government catalog under NSN 5320-00-508-8792. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HLT56A16-13 — PIN-RIVET

Request a Quote — HLT56A16-13