HLT52YC-8-19 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HLT52YC-8-19: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, grip_length: 1.183 INCHES MINIMUM AND 1.193 INCHES MAXIMUM IN, head_height: 0.415 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-462-9019, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HLT52YC-8-19

NSN: 5320-01-462-9019
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	STEEL COMP XM-13 OVERALL
grip_length	1.183 INCHES MINIMUM AND 1.193 INCHES MAXIMUM IN
head_height	0.415 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
shear_strength	12260 DOUBLE POUNDS PER SQUARE INCH
fastener_length	1.573 INCHES MINIMUM AND 1.593 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
head_major_diameter	0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
nominal_thread_size	0.2500 INCHES IN
width_between_flats	0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM IN
NSN	5320-01-462-9019

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.415 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.573 INCHES MINIMUM AND 1.593 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.2500 INCHES IN

•

GRIP LENGTH: 1.183 INCHES MINIMUM AND 1.193 INCHES MAXIMUM IN

•

WIDTH BETWEEN FLATS: 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
HEAD HEIGHT	0.415 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
FASTENER LENGTH	1.573 INCHES MINIMUM AND 1.593 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.2500 INCHES IN
GRIP LENGTH	1.183 INCHES MINIMUM AND 1.193 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED
MINIMUM TENSILE STRENGTH	7750 POUNDS PER SQUARE INCH LBS

SUBSTITUTES & CROSS-REFERENCES 2

10163188Reference document

Same NSN cross-reference

Reference document — Informative reference only

ST3M761C4-19Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy HLT52YC-8-19?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HLT52YC-8-19?

HLT52YC-8-19 is a PIN-RIVET.

What parts can replace HLT52YC-8-19?

There are 2 known substitutes for HLT52YC-8-19: 10163188, ST3M761C4-19. Substitute compatibility should be verified for your specific system.

What is the NSN for HLT52YC-8-19?

HLT52YC-8-19 is cataloged in the U.S. Government catalog under NSN 5320-01-462-9019. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HLT52YC-8-19 — PIN-RIVET

Request a Quote — HLT52YC-8-19