HLT51DL-10-8 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HLT51DL-10-8: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: CROWN COUTERSUNK GREATER THAN 135 DEGREES, grip_length: 0.505 INCHES MAXIMUM IN, lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP AND SOLID FILM, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-241-2830, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HLT51DL-10-8

NSN: 5320-01-241-2830
FSC: 5320 — Rivets
CAGE: 97928 — HUCK INTL INC (USA)

SPECIFICATIONS

material	STEEL COMP XM-13 OVERALL
head_style	CROWN COUTERSUNK GREATER THAN 135 DEGREES
grip_length	0.505 INCHES MAXIMUM IN
lubrication	CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP AND SOLID FILM
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
shear_strength	125000 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
head_major_diameter	0.4739 INCHES MAXIMUM IN
NSN	5320-01-241-2830

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN

•

LUBRICATION: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP AND SOLID FILM

•

FASTENER LENGTH: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: CROWN COUTERSUNK GREATER THAN 135 DEGREES

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.312 INCHES IN

•

GRIP LENGTH: 0.505 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
LUBRICATION	CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP AND SOLID FILM
FASTENER LENGTH	0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	CROWN COUTERSUNK GREATER THAN 135 DEGREES
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.312 INCHES IN
GRIP LENGTH	0.505 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED

SUBSTITUTES & CROSS-REFERENCES 5

MA4758-5-8Reference document

Same NSN cross-reference

Reference document — Secondary reference

HP4758-5-8Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

HLT51YB-10-8Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

HLT51YC-10-8Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

AIC-L-758C5-8Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy HLT51DL-10-8?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HLT51DL-10-8?

HLT51DL-10-8 is a PIN-RIVET.

What parts can replace HLT51DL-10-8?

There are 5 known substitutes for HLT51DL-10-8: MA4758-5-8, HP4758-5-8, HLT51YB-10-8 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for HLT51DL-10-8?

HLT51DL-10-8 is cataloged in the U.S. Government catalog under NSN 5320-01-241-2830. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HLT51DL-10-8 — PIN-RIVET

Request a Quote — HLT51DL-10-8