PartsTable
Technical Data Sheet
Download PDF

HLT151DL-10-14 — PIN-RIVET

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

HLT151DL-10-14: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: CROWN COUNTERSUNK LESS THAN 135 DEGREES, grip_length: 0.875 INCHES NOMINAL IN, head_height: 0.0583 INCHES MINIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-623-5582, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HLT151DL-10-14
NSN: 5320-01-623-5582
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleCROWN COUNTERSUNK LESS THAN 135 DEGREES
grip_length0.875 INCHES NOMINAL IN
head_height0.0583 INCHES MINIMUM IN
shank_stylePIN-RIVET, STRAIGHT, THREADED
thread_class3A A
shank_diameter0.327 INCHES NOMINAL IN
fastener_length1.42 INCHES NOMINAL IN
countersink_angle100.0 DEGREES NOMINAL
head_major_diameter0.4689 INCHES MINIMUM IN
width_between_flats0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
thread_quantity_per_inch24
NSN5320-01-623-5582
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available PIN-RIVET TITLE COMPONENT PN HLT151DL-10-14 MFR PIN-RIVET
KEY FEATURES
•
SHANK DIAMETER: 0.327 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.0583 INCHES MINIMUM IN
•
FASTENER LENGTH: 1.42 INCHES NOMINAL IN
•
HEAD STYLE: CROWN COUNTERSUNK LESS THAN 135 DEGREES
•
GRIP LENGTH: 0.875 INCHES NOMINAL IN
•
WIDTH BETWEEN FLATS: 0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
•
SHANK STYLE: PIN-RIVET, STRAIGHT, THREADED
•
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.327 INCHES NOMINAL IN
HEAD HEIGHT0.0583 INCHES MINIMUM IN
FASTENER LENGTH1.42 INCHES NOMINAL IN
HEAD STYLECROWN COUNTERSUNK LESS THAN 135 DEGREES
GRIP LENGTH0.875 INCHES NOMINAL IN
WIDTH BETWEEN FLATS0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
SHANK STYLEPIN-RIVET, STRAIGHT, THREADED
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
THREAD CLASS3A A
THREAD QUANTITY PER INCH24
OTHER ITEMS IN FSC 5320 — Rivets
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153
SUBSTITUTES & CROSS-REFERENCES 1
ST3M812-5-14Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HLT151DL-10-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HLT151DL-10-14?
HLT151DL-10-14 is a PIN-RIVET.
What parts can replace HLT151DL-10-14?
There is 1 known substitute for HLT151DL-10-14: ST3M812-5-14. Substitute compatibility should be verified for your specific system.
What is the NSN for HLT151DL-10-14?
HLT151DL-10-14 is cataloged in the U.S. Government catalog under NSN 5320-01-623-5582. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HLT151DL-10-14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.