HL744LL6-10 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL744LL6-10: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, grip_length: 0.630 INCHES MAXIMUM IN, head_height: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN, lubrication: CETYL ALCOHOL, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-044-8699, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL744LL6-10

NSN: 5320-01-044-8699
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	STEEL COMP XM-13 OVERALL
grip_length	0.630 INCHES MAXIMUM IN
head_height	0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
lubrication	CETYL ALCOHOL
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.2021 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM IN
shear_strength	125000 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.940 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
surface_treatment	PASSIVATE OVERALL
head_major_diameter	0.295 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
NSN	5320-01-044-8699

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.2021 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM IN

•

LUBRICATION: CETYL ALCOHOL

•

HEAD HEIGHT: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.940 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: PSA000 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.190 INCHES IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.2021 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM IN
LUBRICATION	CETYL ALCOHOL
HEAD HEIGHT	0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
FASTENER LENGTH	0.940 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	PSA000 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.190 INCHES IN
GRIP LENGTH	0.630 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 3

HL44LL6-10Reference document

Same NSN cross-reference

Reference document — Secondary reference

ST3M501-3-10Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

AIC-L-744LL6Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HL744LL6-10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL744LL6-10?

HL744LL6-10 is a PIN-RIVET.

What parts can replace HL744LL6-10?

There are 3 known substitutes for HL744LL6-10: HL44LL6-10, ST3M501-3-10, AIC-L-744LL6. Substitute compatibility should be verified for your specific system.

What is the NSN for HL744LL6-10?

HL744LL6-10 is cataloged in the U.S. Government catalog under NSN 5320-01-044-8699. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL744LL6-10 — PIN-RIVET

Request a Quote — HL744LL6-10