HL710JT-5-5 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL710JT-5-5: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 718 OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 0.3075 INCHES MINIMUM AND 0.3175 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.1630 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-431-3170, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL710JT-5-5

NSN: 5320-01-431-3170
FSC: 5320 — Rivets
CAGE: L4528 — LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC (CAN)

SPECIFICATIONS

material	NICKEL ALLOY 718 OVERALL
head_style	FLUSH COUNTERSUNK
grip_length	0.3075 INCHES MINIMUM AND 0.3175 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.1630 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN
shear_strength	5280 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.6235 INCHES MINIMUM AND 0.6255 INCHES MAXIMUM IN
special_features	LIGHT BLUE IDENTIFICATION ON TOP OF HEAD
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
surface_treatment	PASSIVATE OVERALL
NSN	5320-01-431-3170

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.1630 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.6235 INCHES MINIMUM AND 0.6255 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: SPEC. 258, CAGEC 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.1640 INCHES IN

•

GRIP LENGTH: 0.3075 INCHES MINIMUM AND 0.3175 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.1630 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN
FASTENER LENGTH	0.6235 INCHES MINIMUM AND 0.6255 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	SPEC. 258, CAGEC 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.1640 INCHES IN
GRIP LENGTH	0.3075 INCHES MINIMUM AND 0.3175 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.0791 INCHES MINIMUM AND 0.0801 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 1

HL701JT-5-5Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy HL710JT-5-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL710JT-5-5?

HL710JT-5-5 is a PIN-RIVET.

What parts can replace HL710JT-5-5?

There is 1 known substitute for HL710JT-5-5: HL701JT-5-5. Substitute compatibility should be verified for your specific system.

What is the NSN for HL710JT-5-5?

HL710JT-5-5 is cataloged in the U.S. Government catalog under NSN 5320-01-431-3170. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL710JT-5-5 — PIN-RIVET

Request a Quote — HL710JT-5-5