HL655-5-10 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL655-5-10: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 0.630 INCHES MAXIMUM IN, lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-119-2072, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL655-5-10

NSN: 5320-01-119-2072
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	STEEL COMP XM-13 OVERALL
head_style	FLUSH COUNTERSUNK
grip_length	0.630 INCHES MAXIMUM IN
lubrication	CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.1630 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN
shear_strength	125000 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.927 INCHES MINIMUM AND 0.947 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
surface_treatment	PASSIVATE OVERALL
NSN	5320-01-119-2072

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.1630 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN

•

LUBRICATION: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP

•

FASTENER LENGTH: 0.927 INCHES MINIMUM AND 0.947 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 258,FSCM 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.164 INCHES IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.1630 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN
LUBRICATION	CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
FASTENER LENGTH	0.927 INCHES MINIMUM AND 0.947 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	258,FSCM 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.164 INCHES IN
GRIP LENGTH	0.630 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.0791 INCHES MINIMUM AND 0.0801 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 3

HL655YE-5-10Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

ST3M456C08-10Reference document

Same NSN cross-reference

Reference document — Secondary reference

MA4456-08-10Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy HL655-5-10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL655-5-10?

HL655-5-10 is a PIN-RIVET.

What parts can replace HL655-5-10?

There are 3 known substitutes for HL655-5-10: HL655YE-5-10, ST3M456C08-10, MA4456-08-10. Substitute compatibility should be verified for your specific system.

What is the NSN for HL655-5-10?

HL655-5-10 is cataloged in the U.S. Government catalog under NSN 5320-01-119-2072. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL655-5-10 — PIN-RIVET

Request a Quote — HL655-5-10