HL64PB87-8-11 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL64PB87-8-11: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL BOLT, head_style: COUNTERSUNK W/REVERSE CHAMFER, grip_length: 0.6825 INCHES MINIMUM AND 0.6925 INCHES MAXIMUM IN, head_height: 0.077 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN, lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP, shank_style: PIN-RIVET, STRAIGHT, THREADED. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-607-1521, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL64PB87-8-11

NSN: 5320-01-607-1521
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	STEEL BOLT
head_style	COUNTERSUNK W/REVERSE CHAMFER
grip_length	0.6825 INCHES MINIMUM AND 0.6925 INCHES MAXIMUM IN
head_height	0.077 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
lubrication	CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
shank_style	PIN-RIVET, STRAIGHT, THREADED
collar_style	THREADED BREAK OFF TYPE
thread_class	3B
shank_diameter	0.2641 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM IN
shear_strength	10490 DOUBLE POUNDS PER SQUARE INCH
fastener_length	1.0725 INCHES MINIMUM AND 1.0925 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
NSN	5320-01-607-1521

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.2641 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM IN

•

LUBRICATION: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP

•

WIDTH ACROSS FLATS: 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.077 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.0725 INCHES MINIMUM AND 1.0925 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

COLLAR INSIDE DIAMETER: 0.268 INCHES MINIMUM AND 0.272 INCHES MAXIMUM IN

•

COLLAR OVERALL HEIGHT: 0.532 INCHES MINIMUM AND 0.552 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.2641 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM IN
LUBRICATION	CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
WIDTH ACROSS FLATS	0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM IN
HEAD HEIGHT	0.077 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
FASTENER LENGTH	1.0725 INCHES MINIMUM AND 1.0925 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
COLLAR INSIDE DIAMETER	0.268 INCHES MINIMUM AND 0.272 INCHES MAXIMUM IN
COLLAR OVERALL HEIGHT	0.532 INCHES MINIMUM AND 0.552 INCHES MAXIMUM IN
COLLAR STYLE	THREADED BREAK OFF TYPE
COLLAR OUTSIDE DIAMETER	0.408 INCHES MINIMUM AND 0.412 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 1

HL64Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HL64PB87-8-11?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL64PB87-8-11?

HL64PB87-8-11 is a PIN-RIVET.

What parts can replace HL64PB87-8-11?

There is 1 known substitute for HL64PB87-8-11: HL64. Substitute compatibility should be verified for your specific system.

What is the NSN for HL64PB87-8-11?

HL64PB87-8-11 is cataloged in the U.S. Government catalog under NSN 5320-01-607-1521. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL64PB87-8-11 — PIN-RIVET

Request a Quote — HL64PB87-8-11