HL62PB12-14 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL62PB12-14: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL, head_style: COUNTERSUNK W/REVERSE CHAMFER, grip_length: 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM IN, head_height: 0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN, lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP, shank_style: PIN-RIVET, TAPERED, THREADED. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-658-4483, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL62PB12-14

NSN: 5320-01-658-4483
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL
head_style	COUNTERSUNK W/REVERSE CHAMFER
grip_length	0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM IN
head_height	0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
lubrication	CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
shank_style	PIN-RIVET, TAPERED, THREADED
thread_class	3A A
tip_diameter	0.364 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN
shank_diameter	0.3891 INCHES MINIMUM AND 0.3901 INCHES MAXIMUM IN
shear_strength	22700 DOUBLE POUNDS PER SQUARE INCH
fastener_length	1.41 INCHES MINIMUM AND 1.43 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
NSN	5320-01-658-4483

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.3891 INCHES MINIMUM AND 0.3901 INCHES MAXIMUM IN

•

LUBRICATION: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP

•

HEAD HEIGHT: 0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.41 INCHES MINIMUM AND 1.43 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS-QQ-P-416,TY II,CL 2 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS6415 NATIONAL SPEC 1ST MATERIAL RESPONSE OR AMS6349 OR AMS6382 NATIONAL SPEC 2ND MATERIAL RESPONSE OR AMS6322 NATIONAL SPEC 3RD MATERIAL RESPONSE OVERALL

•

TIP DIAMETER: 0.364 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN

•

HEAD STYLE: COUNTERSUNK W/REVERSE CHAMFER

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.3891 INCHES MINIMUM AND 0.3901 INCHES MAXIMUM IN
LUBRICATION	CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
HEAD HEIGHT	0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
FASTENER LENGTH	1.41 INCHES MINIMUM AND 1.43 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS-QQ-P-416,TY II,CL 2 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS6415 NATIONAL SPEC 1ST MATERIAL RESPONSE OR AMS6349 OR AMS6382 NATIONAL SPEC 2ND MATERIAL RESPONSE OR AMS6322 NATIONAL SPEC 3RD MATERIAL RESPONSE OVERALL
TIP DIAMETER	0.364 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN
HEAD STYLE	COUNTERSUNK W/REVERSE CHAMFER
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.375 INCHES IN

SUBSTITUTES & CROSS-REFERENCES 1

HL62Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HL62PB12-14?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL62PB12-14?

HL62PB12-14 is a PIN-RIVET.

What parts can replace HL62PB12-14?

There is 1 known substitute for HL62PB12-14: HL62. Substitute compatibility should be verified for your specific system.

What is the NSN for HL62PB12-14?

HL62PB12-14 is cataloged in the U.S. Government catalog under NSN 5320-01-658-4483. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL62PB12-14 — PIN-RIVET

Request a Quote — HL62PB12-14