HL5513PC125-126 — GEAR,SPUR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL5513PC125-126: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY HUB, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 2.8000 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-270-8387, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL5513PC125-126

NSN: 3020-00-270-8387
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 93236 — DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE (USA)

SPECIFICATIONS

material	COPPER ALLOY HUB
body_style	PLAIN, SOLID
bore_style	PLAIN BOTH ENDS
tooth_form	STANDARD
pitch_diameter	2.8000 INCHES NOMINAL IN
pressure_angle	20.0000 DEGREES
teeth_quantity	28
style_designator	PROTRUDING HUBS
face_nominal_width	0.500 INCHES IN
hub_nominal_diameter	1.0097 INCHES SECOND END IN
hub_style_designator	PLAIN BOTH ENDS
bore_nominal_diameter	0.6283 INCHES BOTH ENDS IN
NSN	3020-00-270-8387

COMPONENT DIAGRAM

KEY FEATURES

•

BORE NOMINAL DIAMETER: 0.6283 INCHES BOTH ENDS IN

•

HUB NOMINAL DIAMETER: 1.2500 INCHES FIRST END IN

•

TEETH QUANTITY: 28

•

BODY STYLE: PLAIN, SOLID

•

BORE STYLE: PLAIN BOTH ENDS

•

NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.140 INCHES FIRST END IN

TECHNICAL CHARACTERISTICS

BORE NOMINAL DIAMETER	0.6283 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER	1.2500 INCHES FIRST END IN
HUB NOMINAL DIAMETER	1.0097 INCHES SECOND END IN
TEETH QUANTITY	28
BODY STYLE	PLAIN, SOLID
BORE STYLE	PLAIN BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.140 INCHES FIRST END IN
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.110 INCHES SECOND END IN
STYLE DESIGNATOR	PROTRUDING HUBS
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-16540,GRADE A-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE HUB

SUBSTITUTES & CROSS-REFERENCES 6

HL12343PC51-52Reference document

Same NSN cross-reference

Reference document — Secondary reference

10719NReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

HL5552PC125-126Reference document

Same NSN cross-reference

Reference document — Secondary reference

HL12348PC51-52Reference document

Same NSN cross-reference

Reference document — Secondary reference

HL5517PC1Z5-126Reference document

Same NSN cross-reference

Reference document — Secondary reference

GER-24AReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy HL5513PC125-126?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL5513PC125-126?

HL5513PC125-126 is a GEAR,SPUR.

What parts can replace HL5513PC125-126?

There are 6 known substitutes for HL5513PC125-126: HL12343PC51-52, 10719N, HL5552PC125-126 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for HL5513PC125-126?

HL5513PC125-126 is cataloged in the U.S. Government catalog under NSN 3020-00-270-8387. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL5513PC125-126 — GEAR,SPUR

Request a Quote — HL5513PC125-126