HL48DU-5-2 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL48DU-5-2: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, grip_length: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, head_height: 0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-473-2160, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL48DU-5-2

NSN: 5320-01-473-2160
FSC: 5320 — Rivets
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)

SPECIFICATIONS

material	IRON ALLOY 660 OVERALL
grip_length	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
head_height	0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
fastener_length	0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
special_features	LUBRICANT,SOLID FILM LUBE PER MIL-L-46010, TYPE 1
thread_direction	RIGHT-HAND
surface_treatment	PASSIVATE OVERALL
head_major_diameter	0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
nominal_thread_size	0.164 INCHES IN
NSN	5320-01-473-2160

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.164 INCHES IN

•

GRIP LENGTH: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN

•

WIDTH BETWEEN FLATS: 0.079 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
HEAD HEIGHT	0.055 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
FASTENER LENGTH	0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.164 INCHES IN
GRIP LENGTH	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.079 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED
SPECIAL FEATURES	LUBRICANT,SOLID FILM LUBE PER MIL-L-46010, TYPE 1

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 2

HS5603-5A2Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

FTC7695-5-2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy HL48DU-5-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL48DU-5-2?

HL48DU-5-2 is a PIN-RIVET.

What parts can replace HL48DU-5-2?

There are 2 known substitutes for HL48DU-5-2: HS5603-5A2, FTC7695-5-2. Substitute compatibility should be verified for your specific system.

What is the NSN for HL48DU-5-2?

HL48DU-5-2 is cataloged in the U.S. Government catalog under NSN 5320-01-473-2160. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL48DU-5-2 — PIN-RIVET

Request a Quote — HL48DU-5-2