HL445-5-3 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL445-5-3: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-429-3024, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL445-5-3

NSN: 5320-01-429-3024
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OVERALL
head_style	FLUSH COUNTERSUNK
grip_length	0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN
fastener_length	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
surface_treatment	CADMIUM AND CHROMATE OVERALL
head_major_diameter	0.2874 INCHES MINIMUM AND 0.2922 INCHES MAXIMUM IN
nominal_thread_size	0.164 INCHES IN
NSN	5320-01-429-3024

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TY 2, CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.164 INCHES IN

•

GRIP LENGTH: 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN
FASTENER LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TY 2, CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.164 INCHES IN
GRIP LENGTH	0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.0791 INCHES MINIMUM AND 0.0801 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 2

BACB30ND5A3Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

HL525-5-3Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HL445-5-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL445-5-3?

HL445-5-3 is a PIN-RIVET.

What parts can replace HL445-5-3?

There are 2 known substitutes for HL445-5-3: BACB30ND5A3, HL525-5-3. Substitute compatibility should be verified for your specific system.

What is the NSN for HL445-5-3?

HL445-5-3 is cataloged in the U.S. Government catalog under NSN 5320-01-429-3024. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL445-5-3 — PIN-RIVET

Request a Quote — HL445-5-3