HL41-4-2 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL41-4-2: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.1370 INCHES MINIMUM AND 0.1375 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-160-2861, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL41-4-2

NSN: 5320-01-160-2861
FSC: 5320 — Rivets
CAGE: L4528 — LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC (CAN)

SPECIFICATIONS

material	STEEL OVERALL
head_style	FLUSH COUNTERSUNK
grip_length	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.1370 INCHES MINIMUM AND 0.1375 INCHES MAXIMUM IN
shear_strength	95000 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.405 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
head_major_diameter	0.2171 INCHES MINIMUM AND 0.2219 INCHES MAXIMUM IN
nominal_thread_size	0.138 INCHES IN
NSN	5320-01-160-2861

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.1370 INCHES MINIMUM AND 0.1375 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.405 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN

•

CRITICALITY CODE JUSTIFICATION: AAZG AND AAZE AND AATB

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5731 ASSN STD 2ND MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.138 INCHES IN

•

GRIP LENGTH: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.1370 INCHES MINIMUM AND 0.1375 INCHES MAXIMUM IN
FASTENER LENGTH	0.405 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATION	AAZG AND AAZE AND AATB
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5737 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5731 ASSN STD 2ND MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.138 INCHES IN
GRIP LENGTH	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.0635 INCHES MINIMUM AND 0.0645 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 2

ST2263-02Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

ST25D60-4-2Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HL41-4-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL41-4-2?

HL41-4-2 is a PIN-RIVET.

What parts can replace HL41-4-2?

There are 2 known substitutes for HL41-4-2: ST2263-02, ST25D60-4-2. Substitute compatibility should be verified for your specific system.

What is the NSN for HL41-4-2?

HL41-4-2 is cataloged in the U.S. Government catalog under NSN 5320-01-160-2861. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL41-4-2 — PIN-RIVET

Request a Quote — HL41-4-2