PartsTable
Technical Data Sheet
Download PDF

HL3835PC29-64 — GEAR,SPUR

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

HL3835PC29-64: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1023W OVERALL W, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 2.2000 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-272-6023, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HL3835PC29-64
NSN: 3020-00-272-6023
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 93236 — DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE (USA)
SPECIFICATIONS
materialSTEEL COMP 1023W OVERALL W
body_stylePLAIN, SOLID
bore_stylePLAIN BOTH ENDS
tooth_formSTANDARD
pitch_diameter2.2000 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
teeth_quantity22
special_featuresTWO REAMED HOLES THROUGH GEAR 0.250 IN.DIA 180 DEF APART 1.125 IN.CENTERS;TWO DRILLED HOLES 0.312 IN.DIA 0.125 IN.DEEP 90 DEG FROM REAMED HOLES 1.125 IN.CENTERS IN
style_designatorHUBLESS
face_nominal_width0.7495 INCHES IN
bore_nominal_diameter0.6283 INCHES BOTH ENDS IN
nominal_outside_diameter2.3955 INCHES IN
NSN3020-00-272-6023
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEAR,SPUR TITLE COMPONENT PN HL3835PC29-64 MFR GEAR,SPUR
KEY FEATURES
•
BORE NOMINAL DIAMETER: 0.6283 INCHES BOTH ENDS IN
•
TEETH QUANTITY: 22
•
BODY STYLE: PLAIN, SOLID
•
BORE STYLE: PLAIN BOTH ENDS
•
STYLE DESIGNATOR: HUBLESS
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-16974,GRADE 1023W MIL SPEC SINGLE MATERIAL RESPONSE OVERALL W
•
PITCH DIAMETER: 2.2000 INCHES NOMINAL IN
•
TOOTH FORM: STANDARD
TECHNICAL CHARACTERISTICS
BORE NOMINAL DIAMETER0.6283 INCHES BOTH ENDS IN
TEETH QUANTITY22
BODY STYLEPLAIN, SOLID
BORE STYLEPLAIN BOTH ENDS
STYLE DESIGNATORHUBLESS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-16974,GRADE 1023W MIL SPEC SINGLE MATERIAL RESPONSE OVERALL W
PITCH DIAMETER2.2000 INCHES NOMINAL IN
TOOTH FORMSTANDARD
NOMINAL OUTSIDE DIAMETER2.3955 INCHES IN
SPECIAL FEATURESTWO REAMED HOLES THROUGH GEAR 0.250 IN.DIA 180 DEF APART 1.125 IN.CENTERS;TWO DRILLED HOLES 0.312 IN.DIA 0.125 IN.DEEP 90 DEG FROM REAMED HOLES 1.125 IN.CENTERS IN
OTHER ITEMS IN FSC 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3020-00-000-0091 3020-00-001-0027 3020-00-001-0028 3020-00-001-0063 3020-00-001-0064 3020-00-001-0066 3020-00-001-0071 3020-00-001-0072
SUBSTITUTES & CROSS-REFERENCES 1
2014NReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HL3835PC29-64?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HL3835PC29-64?
HL3835PC29-64 is a GEAR,SPUR.
What parts can replace HL3835PC29-64?
There is 1 known substitute for HL3835PC29-64: 2014N. Substitute compatibility should be verified for your specific system.
What is the NSN for HL3835PC29-64?
HL3835PC29-64 is cataloged in the U.S. Government catalog under NSN 3020-00-272-6023. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HL3835PC29-64