PartsTable
Technical Data Sheet
Download PDF

HL360-6-6-5 — STUD,SHOULDERED

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HL360-6-6-5: STUD,SHOULDERED.

The STUD,SHOULDERED is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R56400, thread_class: 3A NUT THREAD A, thread_length: 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM STUD THREAD IN, overall_length: 1.401 INCHES MINIMUM AND 1.411 INCHES MAXIMUM IN, shoulder_length: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, special_features: CETYL ALCOHOL LUBE PER HI-SHEAR SPEC 305; SOCKET DRIVE BOTH ENDS 32.0 MICROINCHES SHANK. This part is cataloged in the U.S.

Government catalog under NSN 5307-01-381-9940, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HL360-6-6-5
NSN: 5307-01-381-9940
FSC: 5307 — Studs
CAGE: 73197 — HI-SHEAR CORPORATION (USA)
SPECIFICATIONS
materialTITANIUM ALLOY UNS R56400
thread_class3A NUT THREAD A
thread_length0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM STUD THREAD IN
overall_length1.401 INCHES MINIMUM AND 1.411 INCHES MAXIMUM IN
shoulder_length0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
special_featuresCETYL ALCOHOL LUBE PER HI-SHEAR SPEC 305; SOCKET DRIVE BOTH ENDS 32.0 MICROINCHES SHANK
style_designatorSHOULDERED
thread_directionRIGHT-HAND NUT THREAD
shoulder_diameter0.357 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
nominal_thread_size0.190 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
nut_end_shank_length0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
stud_end_shank_length0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
NSN5307-01-381-9940
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HL360-6-6-5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT END SHANK DIAMETER: 1.885 INCHES MINIMUM AND 1.895 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM NUT THREAD IN
•
STYLE DESIGNATOR: SHOULDERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD DIRECTION: RIGHT-HAND STUD THREAD
TECHNICAL CHARACTERISTICS
NUT END SHANK DIAMETER1.885 INCHES MINIMUM AND 1.895 INCHES MAXIMUM IN
THREAD LENGTH0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM NUT THREAD IN
THREAD LENGTH0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM STUD THREAD IN
STYLE DESIGNATORSHOULDERED
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE
OVERALL LENGTH1.401 INCHES MINIMUM AND 1.411 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND STUD THREAD
THREAD DIRECTIONRIGHT-HAND NUT THREAD
NOMINAL THREAD SIZE0.190 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
SHOULDER DIAMETER0.357 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5307 — Studs
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5307-00-000-6436 5307-00-001-1578 5307-00-001-1761 5307-00-001-2366 5307-00-001-4491 5307-00-001-4624 5307-00-001-4625
SUBSTITUTES & CROSS-REFERENCES 1
03A193-6-6-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HL360-6-6-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HL360-6-6-5?
HL360-6-6-5 is a STUD,SHOULDERED.
What parts can replace HL360-6-6-5?
There is 1 known substitute for HL360-6-6-5: 03A193-6-6-5. Substitute compatibility should be verified for your specific system.
What is the NSN for HL360-6-6-5?
HL360-6-6-5 is cataloged in the U.S. Government catalog under NSN 5307-01-381-9940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HL360-6-6-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.