HL32PB-6-5 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL32PB-6-5: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 431 OVERALL, grip_length: 0.317 INCHES MAXIMUM IN, head_height: 0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-494-2320, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL32PB-6-5

NSN: 5320-00-494-2320
FSC: 5320 — Rivets
CAGE: 06950 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)

SPECIFICATIONS

material	STEEL COMP 431 OVERALL
grip_length	0.317 INCHES MAXIMUM IN
head_height	0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
shear_strength	125000 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.627 INCHES MINIMUM AND 0.647 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
surface_treatment	CADMIUM OVERALL
head_major_diameter	0.357 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
nominal_thread_size	0.190 INCHES IN
NSN	5320-00-494-2320

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.627 INCHES MINIMUM AND 0.647 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.190 INCHES IN

•

GRIP LENGTH: 0.317 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
HEAD HEIGHT	0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
FASTENER LENGTH	0.627 INCHES MINIMUM AND 0.647 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.190 INCHES IN
GRIP LENGTH	0.317 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED

SUBSTITUTES & CROSS-REFERENCES 2

HL730PB6-5Reference document

Same NSN cross-reference

Reference document — Secondary reference

100-049-6-5Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HL32PB-6-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL32PB-6-5?

HL32PB-6-5 is a PIN-RIVET.

What parts can replace HL32PB-6-5?

There are 2 known substitutes for HL32PB-6-5: HL730PB6-5, 100-049-6-5. Substitute compatibility should be verified for your specific system.

What is the NSN for HL32PB-6-5?

HL32PB-6-5 is cataloged in the U.S. Government catalog under NSN 5320-00-494-2320. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL32PB-6-5 — PIN-RIVET

Request a Quote — HL32PB-6-5