HL30-6-3 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL30-6-3: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 431 OVERALL, grip_length: 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN, head_height: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-797-1508, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL30-6-3

NSN: 5320-00-797-1508
FSC: 5320 — Rivets
CAGE: L4528 — LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC (CAN)

SPECIFICATIONS

material	STEEL COMP 431 OVERALL
grip_length	0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
head_height	0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
shear_strength	7060 DOUBLE POUNDS PER SQUARE INCH
fastener_length	0.503 INCHES MINIMUM AND 0.523 INCHES MAXIMUM IN
special_features	CENTYL ALCOHOL LUBRICATION
thread_direction	RIGHT-HAND
surface_treatment	PASSIVATE OVERALL
head_major_diameter	0.295 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
NSN	5320-00-797-1508

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.503 INCHES MINIMUM AND 0.523 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 258,FSCM 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.190 INCHES IN

•

GRIP LENGTH: 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
HEAD HEIGHT	0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
FASTENER LENGTH	0.503 INCHES MINIMUM AND 0.523 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	258,FSCM 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.190 INCHES IN
GRIP LENGTH	0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 1

HL30-6-03Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HL30-6-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL30-6-3?

HL30-6-3 is a PIN-RIVET.

What parts can replace HL30-6-3?

There is 1 known substitute for HL30-6-3: HL30-6-03. Substitute compatibility should be verified for your specific system.

What is the NSN for HL30-6-3?

HL30-6-3 is cataloged in the U.S. Government catalog under NSN 5320-00-797-1508. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL30-6-3 — PIN-RIVET

Request a Quote — HL30-6-3