HL221PB-10-22 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL221PB-10-22: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.3422 INCHES MINIMUM AND 0.3432 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-505-0894, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL221PB-10-22

NSN: 5320-01-505-0894
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL
head_style	FLUSH COUNTERSUNK
grip_length	1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.3422 INCHES MINIMUM AND 0.3432 INCHES MAXIMUM IN
shear_strength	17600 DOUBLE POUNDS PER SQUARE INCH
special_features	NON-LUBED PINS MUST BE USED WITH WET SEALANTORLUBEDCOLLAR
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
surface_treatment	CADMIUM OVERALL
head_major_diameter	0.6287 INCHES MINIMUM AND 0.6335 INCHES MAXIMUM IN
NSN	5320-01-505-0894

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.3422 INCHES MINIMUM AND 0.3432 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.3125 INCHES IN

•

GRIP LENGTH: 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN

•

WIDTH BETWEEN FLATS: 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.3422 INCHES MINIMUM AND 0.3432 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.3125 INCHES IN
GRIP LENGTH	1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED
SPECIAL FEATURES	NON-LUBED PINS MUST BE USED WITH WET SEALANTORLUBEDCOLLAR

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HL221PB-10-22?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL221PB-10-22?

HL221PB-10-22 is a PIN-RIVET.

What is the NSN for HL221PB-10-22?

HL221PB-10-22 is cataloged in the U.S. Government catalog under NSN 5320-01-505-0894. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL221PB-10-22 — PIN-RIVET

Request a Quote — HL221PB-10-22