HL220-6-4 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL220-6-4: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL, grip_length: 0.255 INCHES MAXIMUM IN, head_height: 0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN, lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-101-4870, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL220-6-4

NSN: 5320-01-101-4870
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL
grip_length	0.255 INCHES MAXIMUM IN
head_height	0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
lubrication	CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.2172 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM IN
shear_strength	95000 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.565 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
surface_treatment	CADMIUM AND CHROMATE OVERALL
head_major_diameter	0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
NSN	5320-01-101-4870

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.2172 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM IN

•

LUBRICATION: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP

•

HEAD HEIGHT: 0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.565 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.190 INCHES IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.2172 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM IN
LUBRICATION	CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
HEAD HEIGHT	0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
FASTENER LENGTH	0.565 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.190 INCHES IN
GRIP LENGTH	0.255 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 1

HL204-5-4Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy HL220-6-4?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL220-6-4?

HL220-6-4 is a PIN-RIVET.

What parts can replace HL220-6-4?

There is 1 known substitute for HL220-6-4: HL204-5-4. Substitute compatibility should be verified for your specific system.

What is the NSN for HL220-6-4?

HL220-6-4 is cataloged in the U.S. Government catalog under NSN 5320-01-101-4870. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL220-6-4 — PIN-RIVET

Request a Quote — HL220-6-4