HL19-5-5 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL19-5-5: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OR STEEL COMP 8740 OR STEEL COMP 4140 OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-421-0108, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL19-5-5

NSN: 5320-00-421-0108
FSC: 5320 — Rivets
CAGE: L4528 — LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC (CAN)

SPECIFICATIONS

material	STEEL COMP 4130 OR STEEL COMP 8740 OR STEEL COMP 4140 OVERALL
head_style	FLUSH COUNTERSUNK
grip_length	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
shear_strength	95000 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.619 INCHES MINIMUM AND 0.639 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
surface_treatment	CADMIUM OVERALL
head_major_diameter	0.256 INCHES MINIMUM AND 0.261 INCHES MAXIMUM IN
NSN	5320-00-421-0108

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.619 INCHES MINIMUM AND 0.639 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY1,CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 FED SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 FED SPEC 2ND MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLUSH COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.164 INCHES IN

•

GRIP LENGTH: 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.163 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
FASTENER LENGTH	0.619 INCHES MINIMUM AND 0.639 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY1,CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758 FED SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 FED SPEC 2ND MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
HEAD STYLE	FLUSH COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.164 INCHES IN
GRIP LENGTH	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.078 INCHES NOMINAL IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED

SUBSTITUTES & CROSS-REFERENCES 2

HS19-5-5Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

R2232P5-5Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy HL19-5-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL19-5-5?

HL19-5-5 is a PIN-RIVET.

What parts can replace HL19-5-5?

There are 2 known substitutes for HL19-5-5: HS19-5-5, R2232P5-5. Substitute compatibility should be verified for your specific system.

What is the NSN for HL19-5-5?

HL19-5-5 is cataloged in the U.S. Government catalog under NSN 5320-00-421-0108. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL19-5-5 — PIN-RIVET

Request a Quote — HL19-5-5