HL18TF-8-7 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL18TF-8-7: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL, head_style: FLAT CHAMFER, grip_length: 0.443 INCHES MAXIMUM IN, head_height: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN, lubrication: SOLID FILM, shank_style: PIN-RIVET, STRAIGHT, THREADED. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-238-8867, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL18TF-8-7

NSN: 5320-01-238-8867
FSC: 5320 — Rivets
CAGE: L4528 — LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC (CAN)

SPECIFICATIONS

material	STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL
head_style	FLAT CHAMFER
grip_length	0.443 INCHES MAXIMUM IN
head_height	0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
lubrication	SOLID FILM
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
shear_strength	95000 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.823 INCHES MINIMUM AND 0.843 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
surface_treatment	CADMIUM AND PHOSPHATE OVERALL
NSN	5320-01-238-8867

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN

•

LUBRICATION: SOLID FILM

•

HEAD HEIGHT: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.823 INCHES MINIMUM AND 0.843 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 3,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL

•

HEAD STYLE: FLAT CHAMFER

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
LUBRICATION	SOLID FILM
HEAD HEIGHT	0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
FASTENER LENGTH	0.823 INCHES MINIMUM AND 0.843 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 3,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
HEAD STYLE	FLAT CHAMFER
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.250 INCHES IN
GRIP LENGTH	0.443 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 2

209F586-104Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

10112264Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy HL18TF-8-7?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL18TF-8-7?

HL18TF-8-7 is a PIN-RIVET.

What parts can replace HL18TF-8-7?

There are 2 known substitutes for HL18TF-8-7: 209F586-104, 10112264. Substitute compatibility should be verified for your specific system.

What is the NSN for HL18TF-8-7?

HL18TF-8-7 is cataloged in the U.S. Government catalog under NSN 5320-01-238-8867. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL18TF-8-7 — PIN-RIVET

Request a Quote — HL18TF-8-7