HL12VAP-14-9 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL12VAP-14-9: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, head_style: COUNTERSUNK W/REVERSE CHAMFER, grip_length: 0.5575 INCHES MINIMUM AND 0.5675 INCHES MAXIMUM IN, head_height: 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN, lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP, shank_style: PIN-RIVET, STRAIGHT, THREADED. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-714-7995, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL12VAP-14-9

NSN: 5320-01-714-7995
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	TITANIUM ALLOY OVERALL
head_style	COUNTERSUNK W/REVERSE CHAMFER
grip_length	0.5575 INCHES MINIMUM AND 0.5675 INCHES MAXIMUM IN
head_height	0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
lubrication	CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
shear_strength	95000 SINGLE POUNDS PER SQUARE INCH
fastener_length	1.1875 INCHES MINIMUM AND 1.2075 INCHES MAXIMUM IN
countersink_angle	90.0 DEGREES NOMINAL
surface_treatment	ALUMINUM OVERALL
NSN	5320-01-714-7995

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN

•

LUBRICATION: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP

•

HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.1875 INCHES MINIMUM AND 1.2075 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: HI-KOTE ALUMINUM PIGMENTED COATING PER HI-SHEAR SPEC 294 MFR REF SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: 6AL-4V PER AMS 4928 OR AMS 4967 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL V

•

HEAD STYLE: COUNTERSUNK W/REVERSE CHAMFER

•

NOMINAL THREAD SIZE: 0.4375 INCHES IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
LUBRICATION	CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
HEAD HEIGHT	0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
FASTENER LENGTH	1.1875 INCHES MINIMUM AND 1.2075 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	HI-KOTE ALUMINUM PIGMENTED COATING PER HI-SHEAR SPEC 294 MFR REF SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	6AL-4V PER AMS 4928 OR AMS 4967 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL V
HEAD STYLE	COUNTERSUNK W/REVERSE CHAMFER
NOMINAL THREAD SIZE	0.4375 INCHES IN
GRIP LENGTH	0.5575 INCHES MINIMUM AND 0.5675 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.1895 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 1

HL12Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HL12VAP-14-9?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL12VAP-14-9?

HL12VAP-14-9 is a PIN-RIVET.

What parts can replace HL12VAP-14-9?

There is 1 known substitute for HL12VAP-14-9: HL12. Substitute compatibility should be verified for your specific system.

What is the NSN for HL12VAP-14-9?

HL12VAP-14-9 is cataloged in the U.S. Government catalog under NSN 5320-01-714-7995. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL12VAP-14-9 — PIN-RIVET

Request a Quote — HL12VAP-14-9