PartsTable
Technical Data Sheet
Download PDF

HL12979PC220 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

HL12979PC220: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.427 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN, thread_length: 1.139 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN, screw_material: STEEL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-088-9050, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HL12979PC220
NSN: 5305-00-088-9050
FSC: 5305 — Screws
CAGE: 93236 — DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE (USA)
SPECIFICATIONS
head_styleFLAT CHAMFER
head_height0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.427 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
thread_length1.139 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length1.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.312 INCHES IN
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch18
NSN5305-00-088-9050
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: HL12979PC220 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.250 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 1.139 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
FASTENER LENGTH1.250 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH1.139 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 4S STYLE
SCREW MATERIALSTEEL
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
1570NReference document
Same NSN cross-reference
Reference document — Design control — primary reference
FFS92Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HL12979PC220?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HL12979PC220?
HL12979PC220 is a SCREW,MACHINE.
What parts can replace HL12979PC220?
There are 2 known substitutes for HL12979PC220: 1570N, FFS92. Substitute compatibility should be verified for your specific system.
What is the NSN for HL12979PC220?
HL12979PC220 is cataloged in the U.S. Government catalog under NSN 5305-00-088-9050. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HL12979PC220