HL11VAP-5-10 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL11VAP-5-10: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R56400 OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN, shank_style: PIN-RIVET, STRAIGHT, THREADED, thread_class: 3A A, shank_diameter: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-356-8781, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL11VAP-5-10

NSN: 5320-01-356-8781
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	TITANIUM ALLOY UNS R56400 OVERALL
head_style	FLUSH COUNTERSUNK
grip_length	0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN
fastener_length	0.927 INCHES MINIMUM AND 0.947 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
head_major_diameter	0.2564 INCHES MINIMUM AND 0.2612 INCHES MAXIMUM IN
nominal_thread_size	0.164 INCHES IN
width_between_flats	0.0635 INCHES MINIMUM AND 0.0645 INCHES MAXIMUM IN
NSN	5320-01-356-8781

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.927 INCHES MINIMUM AND 0.947 INCHES MAXIMUM IN

•

HEAD STYLE: FLUSH COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.164 INCHES IN

•

GRIP LENGTH: 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN

•

WIDTH BETWEEN FLATS: 0.0635 INCHES MINIMUM AND 0.0645 INCHES MAXIMUM IN

•

SHANK STYLE: PIN-RIVET, STRAIGHT, THREADED

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM IN
FASTENER LENGTH	0.927 INCHES MINIMUM AND 0.947 INCHES MAXIMUM IN
HEAD STYLE	FLUSH COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.164 INCHES IN
GRIP LENGTH	0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.0635 INCHES MINIMUM AND 0.0645 INCHES MAXIMUM IN
SHANK STYLE	PIN-RIVET, STRAIGHT, THREADED
COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
THREAD CLASS	3A A

SUBSTITUTES & CROSS-REFERENCES 1

HL11VAZ-5-10Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HL11VAP-5-10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL11VAP-5-10?

HL11VAP-5-10 is a PIN-RIVET.

What parts can replace HL11VAP-5-10?

There is 1 known substitute for HL11VAP-5-10: HL11VAZ-5-10. Substitute compatibility should be verified for your specific system.

What is the NSN for HL11VAP-5-10?

HL11VAP-5-10 is cataloged in the U.S. Government catalog under NSN 5320-01-356-8781. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL11VAP-5-10 — PIN-RIVET

Request a Quote — HL11VAP-5-10