HL10VAZ-5-15 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL10VAZ-5-15: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, grip_length: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, head_height: 0.037 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN, thread_class: 3A A, chamfer_length: 0.031 INCHES NOMINAL IN, shank_diameter: 0.156 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-607-9352, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL10VAZ-5-15

NSN: 5320-01-607-9352
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	TITANIUM ALLOY OVERALL
grip_length	0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
head_height	0.037 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
thread_class	3A A
chamfer_length	0.031 INCHES NOMINAL IN
shank_diameter	0.156 INCHES NOMINAL IN
fastener_length	0.500 INCHES NOMINAL IN
thread_direction	RIGHT-HAND
countersink_angle	45.0 DEGREES NOMINAL
surface_treatment	ALUMINUM OVERALL
countersink_height	0.017 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
width_across_flats	0.242 INCHES MINIMUM AND 0.262 INCHES MAXIMUM IN
NSN	5320-01-607-9352

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.156 INCHES NOMINAL IN

•

WIDTH ACROSS FLATS: 0.242 INCHES MINIMUM AND 0.262 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.037 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.500 INCHES NOMINAL IN

•

CHAMFER LENGTH: 0.031 INCHES NOMINAL IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: HI SHEAR SPEC 294, BLACK THREAD END ASSN STD SINGLE TREATMENT RESPONSE OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 TITANIUM ALLOY 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL V

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.156 INCHES NOMINAL IN
WIDTH ACROSS FLATS	0.242 INCHES MINIMUM AND 0.262 INCHES MAXIMUM IN
HEAD HEIGHT	0.037 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
FASTENER LENGTH	0.500 INCHES NOMINAL IN
CHAMFER LENGTH	0.031 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	HI SHEAR SPEC 294, BLACK THREAD END ASSN STD SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 TITANIUM ALLOY 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL V
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.138 INCHES IN
GRIP LENGTH	0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 1

HL10Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HL10VAZ-5-15?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL10VAZ-5-15?

HL10VAZ-5-15 is a PIN-RIVET.

What parts can replace HL10VAZ-5-15?

There is 1 known substitute for HL10VAZ-5-15: HL10. Substitute compatibility should be verified for your specific system.

What is the NSN for HL10VAZ-5-15?

HL10VAZ-5-15 is cataloged in the U.S. Government catalog under NSN 5320-01-607-9352. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL10VAZ-5-15 — PIN-RIVET

Request a Quote — HL10VAZ-5-15