HL10V4-3 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

HL10V4-3: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, head_style: COUNTERSUNK W/REVERSE CHAMFER, grip_length: 0.1825 INCHES MINIMUM AND 0.1925 INCHES MAXIMUM IN, head_height: 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP, shank_style: PIN-RIVET, STRAIGHT, THREADED. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-702-7012, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

HL10V4-3

NSN: 5320-01-702-7012
FSC: 5320 — Rivets
CAGE: 73197 — HI-SHEAR CORPORATION (USA)

SPECIFICATIONS

material	TITANIUM ALLOY OVERALL
head_style	COUNTERSUNK W/REVERSE CHAMFER
grip_length	0.1825 INCHES MINIMUM AND 0.1925 INCHES MAXIMUM IN
head_height	0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
lubrication	CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
shank_style	PIN-RIVET, STRAIGHT, THREADED
thread_class	3A A
shank_diameter	0.1310 INCHES MINIMUM AND 0.1335 INCHES MAXIMUM IN
shear_strength	95000 SINGLE POUNDS PER SQUARE INCH
fastener_length	0.4715 INCHES MINIMUM AND 0.4915 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	90.0 DEGREES NOMINAL
NSN	5320-01-702-7012

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.1310 INCHES MINIMUM AND 0.1335 INCHES MAXIMUM IN

•

LUBRICATION: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP

•

HEAD HEIGHT: 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.4715 INCHES MINIMUM AND 0.4915 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 OR AMS 4967 INTERNATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: COUNTERSUNK W/REVERSE CHAMFER

•

THREAD DIRECTION: RIGHT-HAND

•

NOMINAL THREAD SIZE: 0.1380 INCHES IN

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.1310 INCHES MINIMUM AND 0.1335 INCHES MAXIMUM IN
LUBRICATION	CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
HEAD HEIGHT	0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
FASTENER LENGTH	0.4715 INCHES MINIMUM AND 0.4915 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 4928 OR AMS 4967 INTERNATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	COUNTERSUNK W/REVERSE CHAMFER
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.1380 INCHES IN
GRIP LENGTH	0.1825 INCHES MINIMUM AND 0.1925 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS	0.0635 INCHES MINIMUM AND 0.0645 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 1

HL10Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy HL10V4-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is HL10V4-3?

HL10V4-3 is a PIN-RIVET.

What parts can replace HL10V4-3?

There is 1 known substitute for HL10V4-3: HL10. Substitute compatibility should be verified for your specific system.

What is the NSN for HL10V4-3?

HL10V4-3 is cataloged in the U.S. Government catalog under NSN 5320-01-702-7012. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

HL10V4-3 — PIN-RIVET

Request a Quote — HL10V4-3