PartsTable
Technical Data Sheet
Download PDF

HK5L5000-064-268 — CATCH,FLUSH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HK5L5000-064-268: CATCH,FLUSH.

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include width: 1.438 INCHES NOMINAL IN, length: 2.154 INCHES NOMINAL IN, special_features: MATL:BRACKET CRES STEEL,BOLT CRES STEEL,PIN CRES STEEL,LEVER CRES STEEL,SPRING NICKEL-CHROMIUM-IRON ALLOY, style_designator: FLUSH LEVER ACTUATOR, bolt_offset_distance: 0.268 INCHES NOMINAL IN, lever_offset_distance: 0.064 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-004-7121, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HK5L5000-064-268
NSN: 5340-01-004-7121
FSC: 5340 — Hardware, Commercial
CAGE: 69370 — HO-HO-KUS, INC (USA)
SPECIFICATIONS
width1.438 INCHES NOMINAL IN
length2.154 INCHES NOMINAL IN
special_featuresMATL:BRACKET CRES STEEL,BOLT CRES STEEL,PIN CRES STEEL,LEVER CRES STEEL,SPRING NICKEL-CHROMIUM-IRON ALLOY
style_designatorFLUSH LEVER ACTUATOR
bolt_offset_distance0.268 INCHES NOMINAL IN
lever_offset_distance0.064 INCHES NOMINAL IN
mounting_hole_diameter0.098 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_width1.062 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_length1.125 INCHES NOMINAL IN
NSN5340-01-004-7121
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HK5L5000-064-268 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT OFFSET DISTANCE: 0.268 INCHES NOMINAL IN
•
LENGTH: 2.154 INCHES NOMINAL IN
•
LEVER OFFSET DISTANCE: 0.064 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLUSH LEVER ACTUATOR
•
MOUNTING HOLE DIAMETER: 0.098 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.062 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BOLT OFFSET DISTANCE0.268 INCHES NOMINAL IN
LENGTH2.154 INCHES NOMINAL IN
LEVER OFFSET DISTANCE0.064 INCHES NOMINAL IN
STYLE DESIGNATORFLUSH LEVER ACTUATOR
MOUNTING HOLE DIAMETER0.098 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH1.062 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH1.125 INCHES NOMINAL IN
SPECIAL FEATURESMATL:BRACKET CRES STEEL,BOLT CRES STEEL,PIN CRES STEEL,LEVER CRES STEEL,SPRING NICKEL-CHROMIUM-IRON ALLOY
WIDTH1.438 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
9118-064-268Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
9M184-064-268Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy HK5L5000-064-268?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HK5L5000-064-268?
HK5L5000-064-268 is a CATCH,FLUSH.
What parts can replace HK5L5000-064-268?
There are 2 known substitutes for HK5L5000-064-268: 9118-064-268, 9M184-064-268. Substitute compatibility should be verified for your specific system.
What is the NSN for HK5L5000-064-268?
HK5L5000-064-268 is cataloged in the U.S. Government catalog under NSN 5340-01-004-7121. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HK5L5000-064-268

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.