PartsTable
Technical Data Sheet
Download PDF

HK5H0795-1 — HINGE,TEE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HK5H0795-1: HINGE,TEE.

The HINGE,TEE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 BODY, knuckle_type: FRICTION, door_leaf_width: 1.000 INCHES NOMINAL IN, jamb_leaf_width: 2.125 INCHES NOMINAL IN, style_designator: TEE, material_thickness: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-115-6337, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HK5H0795-1
NSN: 5340-00-115-6337
FSC: 5340 — Hardware, Commercial
CAGE: 69370 — HO-HO-KUS, INC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 BODY
knuckle_typeFRICTION
door_leaf_width1.000 INCHES NOMINAL IN
jamb_leaf_width2.125 INCHES NOMINAL IN
knuckle_quantity3
style_designatorTEE
material_thickness0.250 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL SURFACE
mounting_hole_diameter0.161 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
mounting_hole_quantity6
material_document_and_classificationTY 302 ASSN STD SINGLE MATERIAL RESPONSE BODY
NSN5340-00-115-6337
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HK5H0795-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 6
•
JAMB LEAF WIDTH: 2.125 INCHES NOMINAL IN
•
REVERSIBLE FEATURE: NOT INCLUDED
•
DOOR LEAF WIDTH: 1.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: TEE
•
MATERIAL DOCUMENT AND CLASSIFICATION: TY 17-7PH ASSN STD SINGLE MATERIAL RESPONSE SPRING
•
MOUNTING HOLE DIAMETER: 0.161 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY6
JAMB LEAF WIDTH2.125 INCHES NOMINAL IN
REVERSIBLE FEATURENOT INCLUDED
DOOR LEAF WIDTH1.000 INCHES NOMINAL IN
STYLE DESIGNATORTEE
MATERIAL DOCUMENT AND CLASSIFICATIONTY 17-7PH ASSN STD SINGLE MATERIAL RESPONSE SPRING
MATERIAL DOCUMENT AND CLASSIFICATIONTY 302 ASSN STD SINGLE MATERIAL RESPONSE BODY
MOUNTING HOLE DIAMETER0.161 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
HINGE MOUNTING TYPEFULL SURFACE
MATERIAL THICKNESS0.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
10117259Reference document
Same NSN cross-reference
Reference document — Informative reference only
5342PL0204807Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy HK5H0795-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HK5H0795-1?
HK5H0795-1 is a HINGE,TEE.
What parts can replace HK5H0795-1?
There are 2 known substitutes for HK5H0795-1: 10117259, 5342PL0204807. Substitute compatibility should be verified for your specific system.
What is the NSN for HK5H0795-1?
HK5H0795-1 is cataloged in the U.S. Government catalog under NSN 5340-00-115-6337. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HK5H0795-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.