PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HJ405224
HJ405224 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL ROLLER, bore_diameter: 2.5000 INCHES NOMINAL IN, overall_width: 1.5000 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE AND GROOVE IN OUTER RACE ALSO MFR STANDARD RETAINER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-3256, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HJ405224
NSN: 3110-00-227-3256
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL ROLLER
bore_diameter2.5000 INCHES NOMINAL IN
overall_width1.5000 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE AND GROOVE IN OUTER RACE ALSO MFR STANDARD RETAINER
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
overall_outside_diameter3.2500 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-227-3256
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: HJ405224 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 2.5000 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 3.2500 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
•
MATERIAL: STEEL OUTER RING
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER2.5000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER3.2500 INCHES NOMINAL IN
SPECIAL FEATURESOIL HOLE AND GROOVE IN OUTER RACE ALSO MFR STANDARD RETAINER
RETAINER FABRICATION METHODPRESSED
MATERIALSTEEL OUTER RING
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
MATERIALSTEEL ROLLER
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
MATERIALSTEEL OR COPPER ALLOY RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
1-4066Interchangeable
interchangeable cross-reference
interchangeable
3124570Interchangeable
interchangeable cross-reference
interchangeable
31928Interchangeable
interchangeable cross-reference
interchangeable
15245Interchangeable
interchangeable cross-reference
interchangeable
13381-1BInterchangeable
interchangeable cross-reference
interchangeable
53-46Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HJ405224?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HJ405224?
HJ405224 is a BEARING,ROLLER,NEEDLE.
What parts can replace HJ405224?
There are 17 known substitutes for HJ405224: 1-4066, 3124570, 31928 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HJ405224?
HJ405224 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-3256. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HJ405224

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026