PartsTable
Technical Data Sheet
Download PDF

HJ243320X1 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

HJ243320X1: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.5010 INCHES MINIMUM AND 1.5019 INCHES MAXIMUM IN, overall_width: 1.2450 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-278-9048, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HJ243320X1
NSN: 3110-01-278-9048
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.5010 INCHES MINIMUM AND 1.5019 INCHES MAXIMUM IN
overall_width1.2450 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
lubrication_materialGREASE
overall_outside_diameter2.0619 INCHES MINIMUM AND 2.0625 INCHES MAXIMUM IN
lubrication_material_document_and_classificationMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-01-278-9048
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: HJ243320X1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
OVERALL OUTSIDE DIAMETER: 2.0619 INCHES MINIMUM AND 2.0625 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 1.5010 INCHES MINIMUM AND 1.5019 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
OVERALL WIDTH1.2450 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER2.0619 INCHES MINIMUM AND 2.0625 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
BORE DIAMETER1.5010 INCHES MINIMUM AND 1.5019 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
214-010-517-101Reference document
Same NSN cross-reference
Reference document — Secondary reference
214-010-517Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HJ243320X1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HJ243320X1?
HJ243320X1 is a BEARING,ROLLER,NEEDLE.
What parts can replace HJ243320X1?
There are 2 known substitutes for HJ243320X1: 214-010-517-101, 214-010-517. Substitute compatibility should be verified for your specific system.
What is the NSN for HJ243320X1?
HJ243320X1 is cataloged in the U.S. Government catalog under NSN 3110-01-278-9048. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HJ243320X1