PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HJ142216
HJ142216 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_diameter: 0.8750 INCHES NOMINAL IN, overall_width: 1.0000 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE AND OIL GROOVE IN OUTER RING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-3239, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HJ142216
NSN: 3110-00-227-3239
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_diameter0.8750 INCHES NOMINAL IN
overall_width1.0000 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE AND OIL GROOVE IN OUTER RING
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
overall_outside_diameter1.3750 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-227-3239
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: HJ142216 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
MATERIAL: STEEL RETAINER
•
BORE DIAMETER: 0.8750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.0000 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
MATERIALSTEEL RETAINER
BORE DIAMETER0.8750 INCHES NOMINAL IN
MATERIALSTEEL ROLLER
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
MATERIALSTEEL OUTER RING
OVERALL OUTSIDE DIAMETER1.3750 INCHES NOMINAL IN
SPECIAL FEATURESOIL HOLE AND OIL GROOVE IN OUTER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
AP932P04Interchangeable
interchangeable cross-reference
interchangeable
AP392T04Interchangeable
interchangeable cross-reference
interchangeable
50602P-04Interchangeable
interchangeable cross-reference
interchangeable
H487Interchangeable
interchangeable cross-reference
interchangeable
GGG-V-412Interchangeable
interchangeable cross-reference
interchangeable
50602Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy HJ142216?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HJ142216?
HJ142216 is a BEARING,ROLLER,NEEDLE.
What parts can replace HJ142216?
There are 17 known substitutes for HJ142216: AP932P04, AP392T04, 50602P-04 and 14 more. Substitute compatibility should be verified for your specific system.
Is HJ142216 still available?
HJ142216 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HJ142216

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026