PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HHP31 TYPE 2
HHP31 TYPE 2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include material: ASBESTOS CHRYSOTILE AND COPPER ALLOY AND COTTON AND RUBBER SYNTHETIC, special_features: PROTECT ENVIRONMENTALLY FROM STEAM, fabrication_method: WOVEN, cross-sectional_width: 0.062 INCHES NOMINAL IN, cross-sectional_height: 40.000 INCHES NOMINAL IN, cross-sectional_shape_style: RECTANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-268-9879, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HHP31 TYPE 2
NSN: 5330-00-268-9879
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialASBESTOS CHRYSOTILE AND COPPER ALLOY AND COTTON AND RUBBER SYNTHETIC
special_featuresPROTECT ENVIRONMENTALLY FROM STEAM
fabrication_methodWOVEN
cross-sectional_width0.062 INCHES NOMINAL IN
cross-sectional_height40.000 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR
nondefinitive_spec/std_data2 TYPE
material_document_and_classificationHH-P-31,TY 2 FED SPEC ALL MATERIAL RESPONSES
NSN5330-00-268-9879
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HHP31 TYPE 2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FABRICATION METHOD: WOVEN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
CROSS-SECTIONAL HEIGHT: 40.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.062 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-31,TY 2 FED SPEC ALL MATERIAL RESPONSES
•
MATERIAL: ASBESTOS CHRYSOTILE AND COPPER ALLOY AND COTTON AND RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
FABRICATION METHODWOVEN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
CROSS-SECTIONAL HEIGHT40.000 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.062 INCHES NOMINAL IN
SPECIAL FEATURESPROTECT ENVIRONMENTALLY FROM STEAM
NONDEFINITIVE SPEC/STD DATA2 TYPE
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-31,TY 2 FED SPEC ALL MATERIAL RESPONSES
MATERIALASBESTOS CHRYSOTILE AND COPPER ALLOY AND COTTON AND RUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
5K19103Interchangeable
interchangeable cross-reference
interchangeable
SK19101SIZE3618Interchangeable
interchangeable cross-reference
interchangeable
1184F1PC90Interchangeable
interchangeable cross-reference
interchangeable
MS686L, MS686KInterchangeable
Same NIIN cross-reference
interchangeable
EV13500PC22Interchangeable
Same NIIN cross-reference
interchangeable
HH-P-31Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy HHP31 TYPE 2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HHP31 TYPE 2?
HHP31 TYPE 2 is a PACKING MATERIAL.
What parts can replace HHP31 TYPE 2?
There are 9 known substitutes for HHP31 TYPE 2: 5K19103, SK19101SIZE3618, 1184F1PC90 and 6 more. Substitute compatibility should be verified for your specific system.
Is HHP31 TYPE 2 still available?
HHP31 TYPE 2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HHP31 TYPE 2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026