PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HH-G-101TY3STJ
HH-G-101TY3STJ ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ASPHALT OVERALL, outside_diameter: 0.953 INCHES NOMINAL IN, special_features: ITEM ALSO MADE OF ACRYLONITRILE LATEX, style_designator: CIRCULAR, aperture_diameter: 0.711 INCHES MINIMUM AND 0.723 INCHES MAXIMUM IN, cross-sectional_thickness: 0.094 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-397-2217, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HH-G-101TY3STJ
NSN: 5330-01-397-2217
FSC: 5330
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialASPHALT OVERALL
outside_diameter0.953 INCHES NOMINAL IN
special_featuresITEM ALSO MADE OF ACRYLONITRILE LATEX
style_designatorCIRCULAR
aperture_diameter0.711 INCHES MINIMUM AND 0.723 INCHES MAXIMUM IN
cross-sectional_thickness0.094 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL WITH SOFT FILLER
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-397-2217
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HH-G-101TY3STJ MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: ASPHALT OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.078 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 5.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL WITH SOFT FILLER
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
•
APERTURE DIAMETER: 5.391 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCIRCULAR
MATERIALASPHALT OVERALL
CROSS-SECTIONAL THICKNESS0.078 INCHES NOMINAL IN
OUTSIDE DIAMETER5.750 INCHES NOMINAL IN
SPECIAL FEATURESITEM ALSO MADE OF ACRYLONITRILE LATEX
CROSS-SECTIONAL SHAPE STYLEMETAL WITH SOFT FILLER
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
APERTURE DIAMETER5.391 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
PA6839Interchangeable
interchangeable cross-reference
interchangeable
QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
9097Interchangeable
interchangeable cross-reference
interchangeable
74-7065Interchangeable
interchangeable cross-reference
interchangeable
T41305Interchangeable
interchangeable cross-reference
interchangeable
43305GInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HH-G-101TY3STJ?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HH-G-101TY3STJ?
HH-G-101TY3STJ is a GASKET.
What parts can replace HH-G-101TY3STJ?
There are 22 known substitutes for HH-G-101TY3STJ: PA6839, QQ-A-200/11, 9097 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HH-G-101TY3STJ?
HH-G-101TY3STJ is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-397-2217. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HH-G-101TY3STJ

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026