PartsTable
Technical Data Sheet

HG-227 3/4X6 — TURNBUCKLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

HG-227 3/4X6: TURNBUCKLE.

The TURNBUCKLE is a the manufacturer industrial component. Key specifications include length: 17.000 INCHES NOMINAL IN, material: STEEL OVERALL, end_style: CLEVIS AND HOOK, body_style: FLAT OPEN BUCKLE, fork_width: 0.938 INCHES NOMINAL IN, body_length: 6.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-298-1351, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HG-227 3/4X6
NSN: 5340-01-298-1351
FSC: 5340 — Hardware, Commercial
CAGE: 75535 — THE CROSBY GROUP LLC DBA THE CROSBY GROUP (USA)
SPECIFICATIONS
length17.000 INCHES NOMINAL IN
materialSTEEL OVERALL
end_styleCLEVIS AND HOOK
body_styleFLAT OPEN BUCKLE
fork_width0.938 INCHES NOMINAL IN
body_length6.000 INCHES NOMINAL IN
pinhole_diameter0.625 INCHES NOMINAL IN
take-up_distance0.750 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
nondefinitive_spec/std_data1 TYPE AND 1 FORM AND 8 CLASS
NSN5340-01-298-1351
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HG-227 3/4X6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TAKE-UP DISTANCE: 0.750 INCHES NOMINAL IN
•
LENGTH: 17.000 INCHES NOMINAL IN
•
BODY STYLE: FLAT OPEN BUCKLE
•
END STYLE: CLEVIS AND HOOK
•
BODY LENGTH: 6.000 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 FORM AND 8 CLASS
•
FORK WIDTH: 0.938 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS
TAKE-UP DISTANCE0.750 INCHES NOMINAL IN
LENGTH17.000 INCHES NOMINAL IN
BODY STYLEFLAT OPEN BUCKLE
END STYLECLEVIS AND HOOK
BODY LENGTH6.000 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 FORM AND 8 CLASS
FORK WIDTH0.938 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
PINHOLE DIAMETER0.625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
FF-T-791Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HG-227 3/4X6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HG-227 3/4X6?
HG-227 3/4X6 is a TURNBUCKLE.
What parts can replace HG-227 3/4X6?
There is 1 known substitute for HG-227 3/4X6: FF-T-791. Substitute compatibility should be verified for your specific system.
What is the NSN for HG-227 3/4X6?
HG-227 3/4X6 is cataloged in the U.S. Government catalog under NSN 5340-01-298-1351. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HG-227 3/4X6