PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HFFXL12G
HFFXL12G ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_style: INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE, thread_class: 3B, tongue_width: 1.760 INCHES NOMINAL IN, bore_diameter: 0.7495 INCHES MINIMUM AND 0.7515 INCHES MAXIMUM IN, overall_length: 3.7400 INCHES MINIMUM AND 3.7600 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-103-8324, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HFFXL12G
NSN: 5340-00-103-8324
FSC: 5340
CAGE: 74185 — BEARINGS INC DEES FLUID POWER DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_styleINTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE
thread_class3B
tongue_width1.760 INCHES NOMINAL IN
bore_diameter0.7495 INCHES MINIMUM AND 0.7515 INCHES MAXIMUM IN
overall_length3.7400 INCHES MINIMUM AND 3.7600 INCHES MAXIMUM IN
style_designatorBALL TYPE
thread_directionLEFT-HAND
tongue_thickness0.770 INCHES NOMINAL IN
features_providedEXTERNAL LUBRICATION FITTING
surface_treatmentCADMIUM OVERALL
inner_member_width0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
NSN5340-00-103-8324
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HFFXL12G MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2B ROD CONNECTION
•
SURFACE TREATMENT: CADMIUM OVERALL
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
TONGUE WIDTH: 1.760 INCHES NOMINAL IN
•
DISTANCE FROM END TO HOLE CENTER: 2.755 INCHES NOMINAL IN
•
ROD CONNECTION END LENGTH: 1.875 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNF ROD CONNECTION
•
SHANK OUTSIDE DIAMETER: 1.130 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2B ROD CONNECTION
SURFACE TREATMENTCADMIUM OVERALL
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
TONGUE WIDTH1.760 INCHES NOMINAL IN
DISTANCE FROM END TO HOLE CENTER2.755 INCHES NOMINAL IN
ROD CONNECTION END LENGTH1.875 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNF ROD CONNECTION
SHANK OUTSIDE DIAMETER1.130 INCHES NOMINAL IN
TONGUE THICKNESS0.770 INCHES NOMINAL IN
STYLE DESIGNATORCONNECTOR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
41361Interchangeable
interchangeable cross-reference
interchangeable
984633-1Interchangeable
interchangeable cross-reference
interchangeable
HFFXL12GInterchangeable
interchangeable cross-reference
interchangeable
HFXL12GInterchangeable
interchangeable cross-reference
interchangeable
MD2428REVAPC17Interchangeable
interchangeable cross-reference
interchangeable
860-723Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HFFXL12G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HFFXL12G?
HFFXL12G is a BEARING,PLAIN,ROD END.
What parts can replace HFFXL12G?
There are 6 known substitutes for HFFXL12G: 41361, 984633-1, HFFXL12G and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HFFXL12G?
HFFXL12G is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-103-8324. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HFFXL12G

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026