PartsTable
Technical Data Sheet
Download PDF

HF810-3 — KEY,WOODRUFF

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

HF810-3: KEY,WOODRUFF.

The KEY,WOODRUFF is a the manufacturer industrial component. Key specifications include thickness: 0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, key_height: 0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, overall_length: 3.000 INCHES NOMINAL IN, shoulder_height: 0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, style_designator: FLAT BOTTOM SHOULDERED ENDS, features_provided: CASEHARDENED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-406-3419, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HF810-3
NSN: 5315-00-406-3419
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 41691 — MORTON MFG CO
SPECIFICATIONS
thickness0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
key_height0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
overall_length3.000 INCHES NOMINAL IN
shoulder_height0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
style_designatorFLAT BOTTOM SHOULDERED ENDS
features_providedCASEHARDENED
starting_edge_shapeSTRAIGHT
NSN5315-00-406-3419
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: HF810-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHOULDER HEIGHT: 0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
STARTING EDGE SHAPE: STRAIGHT
•
STYLE DESIGNATOR: FLAT BOTTOM SHOULDERED ENDS
•
FEATURES PROVIDED: CASEHARDENED
•
KEY HEIGHT: 0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
•
THICKNESS: 0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SHOULDER HEIGHT0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
STARTING EDGE SHAPESTRAIGHT
STYLE DESIGNATORFLAT BOTTOM SHOULDERED ENDS
OVERALL LENGTH3.000 INCHES NOMINAL IN
FEATURES PROVIDEDCASEHARDENED
KEY HEIGHT0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
THICKNESS0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 2
5315004063419Reference document
Same NSN cross-reference
Reference document — Secondary reference
LD427C203Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy HF810-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HF810-3?
HF810-3 is a KEY,WOODRUFF.
What parts can replace HF810-3?
There are 2 known substitutes for HF810-3: 5315004063419, LD427C203. Substitute compatibility should be verified for your specific system.
What is the NSN for HF810-3?
HF810-3 is cataloged in the U.S. Government catalog under NSN 5315-00-406-3419. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HF810-3