PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HE431-9001-0003
HE431-9001-0003 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.250 INCHES NOMINAL IN, length: 0.875 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.157 INCHES NOMINAL IN, overall_height: 1.627 INCHES NOMINAL IN, smallest_width: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-913-1002, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HE431-9001-0003
NSN: 5340-00-913-1002
FSC: 5340
CAGE: 89372 — ROCKWELL INTERNATIONAL CORP NORTH AMERICAN AIRCRAFT OPNS (USA)
SPECIFICATIONS
width1.250 INCHES NOMINAL IN
length0.875 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.157 INCHES NOMINAL IN
overall_height1.627 INCHES NOMINAL IN
smallest_width0.625 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
material_thickness0.032 INCHES NOMINAL IN
loop/holding_dimension1.104 INCHES NOMINAL IN
distance_from_loop_center_to_end1.030 INCHES NOMINAL IN
NSN5340-00-913-1002
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HE431-9001-0003 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.875 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
WIDTH: 1.250 INCHES NOMINAL IN
•
SMALLEST WIDTH: 0.625 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 1.030 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.157 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH0.875 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
WIDTH1.250 INCHES NOMINAL IN
SMALLEST WIDTH0.625 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END1.030 INCHES NOMINAL IN
HOLE DIAMETER0.157 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OVERALL
OVERALL HEIGHT1.627 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION1.104 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
2200-10Interchangeable
interchangeable cross-reference
interchangeable
102603Interchangeable
interchangeable cross-reference
interchangeable
102626Interchangeable
interchangeable cross-reference
interchangeable
253455H1Interchangeable
interchangeable cross-reference
interchangeable
MSS220010Interchangeable
interchangeable cross-reference
interchangeable
6515NCM127845Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HE431-9001-0003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HE431-9001-0003?
HE431-9001-0003 is a CLIP,SPRING TENSION.
What parts can replace HE431-9001-0003?
There are 7 known substitutes for HE431-9001-0003: 2200-10, 102603, 102626 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HE431-9001-0003?
HE431-9001-0003 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-913-1002. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HE431-9001-0003

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026